PERANCANGAN PEMBANGKIT LISTRIK TENAGA TURBIN ANGIN POROS VERTIKAL TYPE CROSS FLOW 8 SUDU

1303025012 - Hendri Hardiansyah ; Ir.Harry Ramza,M.T.,PhD,MIPM; Mujirudin, S.T., M.T.,;

Alternative power plants that are environmentally friendly can be developed in
renewable energy innovations, such as the utilization of wind energy turbulence
obtained on the ground floor of tall buildings. In order to reduce non-renewable
fossil energy sources, an alternative energy solution is to design a power
generating device using a cross-type vertical porous wind turbine type. From this
final project study the design method was made in a transverse flow vertical shaft
wind turbine with blades of 8 blades with rotating angle position θ = 45 °, cross
sectional dimensions of 60 cm and length of 100 cm, generator using Miniangce
Sttepper Type 2 generator LMC315-08 as energy convertion. Conduct testing with
no-load measurements, load 1 watt and 5 watt. The result of the test tool without
the wind speed load is 4.5 m / s, TSR is 𝝀 0.57, the generator output is 14.09 Volts
and the wind power is 33.50 Watt. While the results of testing the tools with the
addition of load to get the highest efficiency value is a 5 Watt lamp load, where
the highest wind speed of 4.2 m / s gets an efficiency of 1.25%.